5 usb device connection, Figure 3-16: db-9 serial port connector, Figure 3-16 – IEI Integration TANK-6000-C226 User Manual
Page 35
Advertising

TANK-6000-C226 Em b e d d e d S ys te m
P a g e 25
Figure 3-16: DB-9 Serial Port Connector
S te p 3:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
S tep 0:
3.8.5 US B De vic e Co n n e c tio n
NOTE:
User must install the USB 3.0 driver before connecting a USB device to
the system or else the system may not recognize the connected
device.
There are four USB 3.0 connectors and two USB 2.0 connectors on the TANK-6000-C226.
To connect a USB device, please follow the instructions below.
S te p 1:
Locate the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Advertising