4 db-9 serial port connection, Figure 3-15: lan connection – IEI Integration TANK-6000-C226 User Manual
Page 34
TANK-6000-C226 Em b e d d e d S ys te m
P a g e 24
S te p 1:
Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 1.
S te p 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-6000-C226. See
Figure 3-15: LAN Connection
S te p 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the RJ-45 connector.
S te p 0:
3.8.4 DB-9 S e ria l P o rt Co n n e c tio n
There are two RS-232 DB-9 connectors on the TANK-6000-C226. Follow the steps below
to connect a serial device to the DB-9 connector of the TANK-6000-C226.
S te p 1:
Locate the DB-9 connector. The locations of the DB-9 connectors are shown
in Chapter 1.
S te p 2:
Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the rear panel. See Figure 3-16.