IEI Integration TANK-6000-C226 - Manual (Page 29)

TANK-6000-C226 Em b e d d e d S ys te m
P a g e 19
3.5 AT/ATX Mo d e S e le c tio n
AT or ATX power mode can be used on the TANK-6000-C226. The selection is made
through an AT/ATX switch located on the rear panel. To select AT mode or ATX mode,
follow the steps below.
S te p 1: Locate the AT/ATX switch on the rear panel (Figure 3-10).
Figure 3-10: AT/ATX Switch Location
S te p 2: Adjust the AT/ATX switch. S te p 0:
3.5.1 AT P o we r Mo d e
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The TANK-6000-C226 panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
3.5.2 ATX P o we r Mo d e
With the ATX mode selected, the TANK-6000-C226 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch