IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.20 - Manual (Page 140)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 129
Step 6: In the following window, select a SATA controller mode used in the system. Then
press <Enter>. The user can now start using the SATA HDD.
Step 7: After pressing <Enter>, the system will get into the recovery tool setup menu.
Continue to follow the setup procedure from Step 4 in Section
76
C.2.2 Create
Partitions to finish the whole setup process. Step 0:
C.7.2 System Memory Requirement
To be able to access the recovery tool by pressing <F3> while booting up the system,
please make sure to have enough system memory. The minimum memory requirement is
listed below.
ƒ Using Award BIOS: 128 MB system memory
ƒ Using AMI BIOS: 512 MB system memory.