8 power connection, 9 driver installation, Ower – IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.20 User Manual

Page 37: Onnection, River, Nstallation, Figure 2-11: vga connector

Advertising

Page 26

Figure 2-11: VGA Connector

Step 4:

Secure the connector

. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

Step 0:

2.8 Power Connection

The power cable connects the panel PC to the power supply. The power cable is required

for operation of the panel PC.

Step 1:

Connect one end to the panel PC.

Step 2:

Connect the other end to the included power supply

Step 0:

2.9 Driver Installation

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system. Each driver is in its own directory on

the driver CD:

Advertising