IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.20 - Manual (Page 48)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 37
Î
Auto D EFAULT
BIOS auto detects the LBA mode control on the specified
channel.
Î Block (Multi Sector Transfer) [Auto]
Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the
device supports multi-sector transfers.
Î
Disabled
BIOS is prevented from using Multi-Sector Transfer on the
specified channel. The data to and from the device occurs
one sector at a time.
Î
Auto D EFAULT
BIOS auto detects Multi-Sector Transfer support on the
drive on the specified channel. If supported the data
transfer to and from the device occurs multiple sectors at
a time.
Î PIO Mode [Auto]
Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing
cycles between the IDE drive and the programmable IDE controller. As the PIO mode
increases, the cycle time decreases.
Î
Auto D EFAULT
BIOS auto detects the PIO mode. Use this value if the IDE disk
drive support cannot be determined.
Î
0
PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s
Î
1 PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s
Î
2 PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s
Î
3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s
Î
4 PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s
(This setting generally works with all hard disk drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)