IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.20 - Manual (Page 63)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 52
Î
30 Sec
POST waits 30 seconds for the USB mass storage
device after the start unit command.
Î
40 Sec POST waits 40 seconds for the USB mass storage
device after the start unit command.
Î Device ##
The Device## field lists the USB devices that are connected to the system.
Î Emulation Type [Auto]
Use the Emulation Type BIOS option to specify the type of emulation BIOS has to
provide for the USB device.
Î
Auto D EFAULT
BIOS auto-detects the current USB.
Î
Floppy The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Î
Forced FDD Allows a hard disk image to be connected as a
floppy image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.
Î
Hard Disk Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
80h or above.
Î
CDROM Assumes the CD-ROM is formatted as bootable
media. All the devices that support block sizes
greater than 512 bytes can only be booted using this
option.