IEI Integration AFL2-15A-H61 - Manual (Page 46)

AFL2-15A-H61
Page 29
Step 2: Press the reset button. Step 0:
3.10 Powering On the System
To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.2.
Step 2: Hold down the Function and Brightness Up buttons for three seconds to power
on the system. Step 0:
3.11 Powering Off the System
To power off the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.2.
Step 2: Hold down the Function and Brightness Up buttons for six seconds to power off
the system. Step 0:
3.12 Mounting the System
WARNING:
When mounting the flat bezel panel PC onto an arm, onto the wall or
onto a panel, it is better to have more than one person to help with the
installation to make sure the panel PC does not fall down and get
damaged.
The three methods of mounting the AFL2-15A-H61 are listed below.
ƒ Wall mounting
ƒ Arm mounting
ƒ Stand mounting
The three mounting methods are described below.