6 usb device connection – IEI Integration AFL2-15A-H61 User Manual
Page 58
Advertising
AFL2-15A-H61
Page 41
Figure 3-25: Type K Temperature Sensor Installation
3.13.6 USB Device Connection
NOTE:
User must install the USB 3.0 driver before connecting a USB device to
the system or else the system may not recognize the connected
device.
There are three USB 2.0 connectors and two USB 3.0 connectors on the AFL2-15A-H61.
To connect a USB device, please follow the instructions below.
Step 1:
Locate the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Step 2:
Align the connectors. Align the USB device connector with one of the
connectors on the AFL2-15A-H61. See Figure 3-26.
Advertising