IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 - Manual (Page 110)

AFL2-W15A-N270/L325 Panel PC
Page 98
4.1 System Maintenance Introduction
If the components of the AFL2-W15A-N270/L325 fail they must be replaced, such as the
wireless LAN module or the motherboard. Please contact the system reseller or vendor to
purchase the replacement parts. Back cover removal instructions and jumper settings for
the AFL2-W15A-N270/L325 are described below.
4.2 Motherboard Replacement
In the case of motherboard failure, please contact an IEI sales representative, reseller or
system vendor. The motherboard is accessible after opening the rear cover.
4.3 Cover Removal
WARNING!
Turn off the power before removing the back cover . Risk of
electrocution. Severe damage to the product and injury to the body
may occur if internal parts are touched while the power is still on.
WARNING!
Take antistatic precautions when working on the internal
components. Some internal components are easily damaged or
destroyed by electrostatic discharge. Take antistatic precautions to
prevent electrostatic discharge.
To replace any of the following components,
ƒ Memory module
ƒ Wireless LAN module
The back cover of the AFL2-W15A-N270/L325 must be removed. To remove the back
cover, unfasten the retention screws and then lift the cover to remove.