1 unpack the panel pc, 2 packing list – IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 User Manual
Page 24
AFL2-W15A-N270/L325 Panel PC
Page 12
2.1 Unpack the Panel PC
To unpack the flat panel PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2:
Open the outside box.
Step 3:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4:
Open the inside box.
Step 5:
Lift the monitor out of the boxes.
Step 6:
Remove the peripheral parts box from the main box.
S
te
p
0
:
2.2 Packing List
The AFL2-W15A-N270/L325 flat panel PC is shipped with the following components:
Quantity Item
Image
1
AFL2-W15A-N270/L325
1
Power adapter
1
Power cord