IEI Integration AFL2-W15A-N270_W15A-L325 v1.01 - Manual (Page 76)

AFL2-W15A-N270/L325 Panel PC
Page 64
3.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Serial Port3 Address [3E8]
Serial Port3 IRQ [10]
Serial Port3 Mode [RS232/RS422]
Serial Port5 Address [338]
Serial Port5 IRQ [10]
Serial Port6 Address [238]
Serial Port6 IRQ [11]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
V02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
Î Serial Port1 Address [3F8/IRQ4]
Selects the serial port base address.
Î
Disabled No base address
Î
3F8/IRQ4 D EFAULT
I/O address 3F8 and interrupt address IRQ4
Î
3E8/IRQ4 I/O address 3E8 and interrupt address IRQ4
Î Serial Port2 Address [2F8/IRQ3]
Selects the serial port base address.
Î
Disabled No base address
Î
2F8/IRQ3 D EFAULT
I/O address 2F8 and interrupt address IRQ3
Î
3E8/IRQ4 I/O address 3E8 and interrupt address IRQ4