2 panel mounting, Figure 4-11: secure the panel pc, Figure 4-12: cutout dimensions – IEI Integration AFL2-08A-N26 User Manual
Page 49
Advertising
AFL2-08A-N26
P a g e 33
Figure 4-11: Secure the Panel PC
4.11.2 P a n e l Mo u n tin g
To mount the AFL2-08A-N26 flat bezel panel PC into a panel, please follow the steps
below.
S te p 1:
Select the position on the panel to mount the flat bezel panel PC.
S te p 2:
Cut out a section corresponding to the size shown below. The size must be
smaller than the outer edge.
Figure 4-12: Cutout Dimensions
Advertising