IEI Integration AFL2-W07A-N26 - Manual (Page 107)

AFL2-W07A-N26
P a g e 91
 Qu iet Bo o t [En ab led ]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled Normal POST messages displayed

Enabled D EFAULT OEM Logo displayed instead of POST messages
 Lau n ch P XE Op ROM [Dis ab led ]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled D EFAULT Ignore all PXE Option ROMs

Enabled Load PXE Option ROMs.
 Op tio n ROM Mes s ag es [Fo rce BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
D EFAULT Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.
 UEFI Bo o t [Dis ab led ]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled Boot from UEFI devices is enabled.

Disabled D EFAULT Boot from UEFI devices is disabled.
 Bo o t Op tio n Prio rity
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.