IEI Integration AFL2-W07A-N26 - Manual (Page 43)

AFL2-W07A-N26
P a g e 27
4.6 AT/ATX Mo d e S e le c tio n
AT or ATX power mode can be used on the AFL2-W07A-N26. The selection is made
through an AT/ATX switch located on the bottom panel (Figure 4-6). To select AT mode or
ATX mode, follow the steps below.
S te p 1: Locate the AT/ATX switch on the bottom panel (Figure 4-6).
Figure 4-6: AT/ATX Switch Location
S te p 11: Adjust the AT/ATX switch. S te p 0:
4.6.1 AT P o we r Mo d e
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL2-W07A-N26 panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
 ATM
 Self-service kiosk
 Plant environment monitoring system
 Factory automation platform
 Manufacturing shop flow
4.6.2 ATX P o we r Mo d e
With the ATX mode selected, the AFL2-W07A-N26 panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the