2 wlan card replacement, Figure 6-4: ddr so-dimm module installation, Figure 6-4 ) – IEI Integration AFL2-W07A-N26 User Manual
Page 79
AFL2-W07A-N26
P a g e 63
Figure 6-4: DDR SO-DIMM Module Installation
S te p 10:
Replace the internal aluminum cover and secure it to the chassis using five (5)
retention screws.
S te p 11:
Replace the back cover and secure it using ten (10) previously removed
retention screws.
S te p 0:
6.5.2 WLAN Ca rd Re p la c e m e n t
The AFL2-W07A-N26 has one WLAN card slot. To replace the WLAN card, follow the
instructions below.
S te p 1:
Follow all anti-static procedures. See Section 6.2.
S te p 2:
Turn off the power. See Section 6.3.
S te p 3:
Remove the back cover. See Section 6.4.1 above.
S te p 4:
Remove the internal back cover. See Section 6.4.2 above.
S te p 5:
Locate the WLAN card.
S te p 6:
Disconnect the main and auxiliary antennas on the WLAN module and push the
two spring clips in to release the WLAN card (Figure 6-5).