IEI Integration AFL2-W07A-N26 - Manual (Page 54)

AFL2-W07A-N26
P a g e 38
S te p 11: Align the connector. Align the RJ-45 connector on the LAN cable with the
RJ-45 connector on the AFL2-W07A-N26. See Figure 4-17.
Figure 4-17: LAN Connection
S te p 12: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.
4.12.4 S e ria l De vic e Co n n e c tio n
There is one external RS-232 DB-9 connector and one RS-422/485 RJ-11 connector for
serial device connection. Follow the steps below to connect a serial device to the
AFL2-W07A-N26.
4.12.4.1 DB-9 S e ria l P o rt Co n n e c tio n
Follow the steps below to connect a serial device to the DB-9 connector of the
AFL2-W07A-N26 panel PC.
S te p 13: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 1.