Lincoln Electric IM10180 POWER FEED 25M NNS - Manual (Page 24)

B-9
OPERATION POWER FEED™ 25M NNS
SELECTING A WELD MODE
Weld modes may be selected by mode number or through a search
function.
To select a weld mode:
1. Press the left button until the Weld Mode Menu LED illuminates.
2. Rotate the center knob to select the weld mode.
To enter the search function:
1. Rotate the center knob until “Weld Mode Search” is displayed and
then press the right button.
2. Rotate the center knob to select the wire material. Press the right
button to accept and the left button to cancel.
3. Rotate the center knob to select the wire size. Press the right
button to accept and the left button to cancel.
4. Rotate the center knob to make the final selection about the
process, gas type and waveform. Press the right button to accept
and the left button to cancel.