Lincoln Electric IM10022 POWER WAVE AC_DC 1000 SD - Manual (Page 10)

A-1 INSTALLATION
POWER WAVE ® AC/DC 1000 ® SD
A-1
TECHNICAL SPECIFICATIONS - Power Wave ® AC/DC 1000 ® SD (K2803-1)
OUTPUT
RECOMMENDED INPUT WIRE AND FUSE SIZES 1
PHYSICAL DIMENSIONS
TEMPERATURE RANGES
INPUT AT RATED OUTPUT - THREE PHASE ONLY
INPUT VOLTS
3 PHASE
50/60 Hz
380
400
460
500
575
OPEN
CIRCUIT
VOLTAGE
70V
70VACpk.
3 PHASE INPUT
VOLTAGE 50/60Hz
380
400
460
500
575
HEIGHT
49.13 in
1248 mm
CONFORMITY MARK MODEL
K2803-1
WIDTH
19.71 in
501mm
DEPTH
46.60 in
1184 mm
WEIGHT
800 lbs.
363 kg.
TIME-DELAY FUSE
OR BREAKER 2
AMPS
100
90
90
80
70
COPPER GROUNDING
CONDUCTOR
AWG (mm 2 )
8 (10)
8 (10)
8 (10)
8 (10)
10 (6)
TYPE 90°C
COPPER WIRE 3 IN
CONDUIT
AWG (mm 2 )
3(25)
3(25)
4(25)
4(25)
6(16)
PROCESS CURRENT RANGES (AC or DC)
SAW-DC+ 100 amps @24 Volts
SAW-DC- 1000 Amps @44 Volts
SAW-AC (Actual range may be limited by process)
AUXILIARY POWER
(CIRCUIT BREAKER
PROTECTED)
40 VDC AT
10 AMPS
115 VAC AT
10 AMPS
INPUT
CURRENT AMPS
82
79
69
62
55
IDLE
POWER
WATTS
225
POWER FACTOR
@ RATED OUTPUT
.95
EFFICIENCY
@ RATED OUTPUT
86%
OUTPUT
CONDITIONS
1000A@44V.
100% Duty Cycle
OPERATING TEMPERATURE RANGE
14°F to 104°F(-10°C to 40°C)
STORAGE TEMPERATURE RANGE
-40°F to 185°F(-40°C to 85°C)
1 Wire and Fuse Sizes based upon the U.S. National Electric Code and maximum output for 40°C (104°) ambient.
2 Also called “inverse time” or “thermal/magnetic” circuit breakers; circuit breakers that have a delay in tripping action that decreases as the
magnitude of current increases.
3 Fail to use proper type of copper wire will cause fire hazards.
* An external filter will be required to meet CE and C-Tick conducted emission requirements. It will meet CE and C-Tick requirements with the
use of an optional external filter. (K2444-3 CE and C-Tick Filter Kit)
}
WELDING PROCESSES
Process
SAW
Electrode Diameter Range
5/64 – 7/32" (2 – 5.6 mm)
Output Range (Amperes)
100 - 1000
Wire Feed Speed Range
See Wire Drive Manual
Insulation Class: Class F(155°C)
EN 60974-1
CSA C/US *