Lincoln Electric IM10022 POWER WAVE AC_DC 1000 SD - Manual (Page 31)

B-1 OPERATION
POWER WAVE ® AC/DC 1000 ® SD
B-1
SAFETY PRECAUTIONS
Read this entire section of operating instructions
before operating the machine.
ELECTRIC SHOCK can kill.
• Unless using cold feed feature, when
feeding with gun trigger, the
electrode and drive mechanism are
always electrically energized and
could remain energized several
seconds after the welding ceases.
• Do not touch electrically live parts or electrodes
with your skin or wet clothing.
• Insulate yourself from the work and ground.
• Always wear dry insulating gloves.
FUMES AND GASES can be
dangerous.
• Keep your head out of fumes.
• Use ventilation or exhaust to remove
fumes from breathing zone.
WELDING SPARKS can cause
fire or explosion.
• Keep flammable material away.
• Do not weld on containers that have
held combustibles.
ARC RAYS can burn.
• Wear eye, ear, and body protection.
Observe additional guidelines detailed in the
beginning of this manual.
DEFINITIONS OF WELDING MODES
NON-SYNERGIC WELDING MODES
• A Non-synergic welding mode requires all welding
process variables to be set by the operator.
SYNERGIC WELDING MODES
• A Synergic welding mode offers the simplicity of
single knob control. The machine will select the
correct voltage and amperage based on the wire
feed speed (WFS) set by the operator.
COMMON WELDING ABBREVIATIONS
SAW
• Submerged Arc Welding
GRAPHIC SYMBOLS THAT
APPEAR ON
THIS MACHINE OR IN THIS
MANUAL
WARNING
WORK SENSE LEAD
CONNECTOR
MULTI-ARC
CONNECTOR
PARALLEL ARC
CONNECTOR
ETHERNET
CONNECTOR
ARC LINK
CONNECTOR
DEVICENET
CONNECTOR
115VAC
RECEPTACLE
Device
COMMUNICATIONS PROTOCOL
NEUTRAL BONDED TO FRAME
NEUTRE RACCORDE AU BATI
NEUTRO CONECTADO AL CHASIS
L15129-4
15V 10A