Lincoln Electric IM10022 POWER WAVE AC_DC 1000 SD - Manual (Page 35)

B-5 OPERATION B-5
CASE BACK COMPONENTS (See Figure B.3)
1. 10 Amp Circuit Breaker (CB1): Protects the 40VDC wire feeder power supply.
2. 10 amp Circuit Breaker (CB-2): Protects the 115VAC Auxiliary Power Receptacle.
3. Work Sense Lead Connector(4 Pin): Connection point for the #21 lead.
4. Arclink Connector (5 Pin): Provides power and communication to the controller.
5. Devicenet Connector: Provides Devicenet communication to remote equipment.
6. Output Studs (2) (WORK): Connection point for welding cable(s) to the work piece.
7. Output Studs (2) (ELECTRODE): Connection point for welding cables to the Wire Drive.
8. Auxiliary Output Receptacle: Provides 10 amps of 115VAC power.
9. Ethernet Connector (RJ-45): Provides Ethernet communication to remote equipment.
10. Master Input: From Lead or previous trail arc in a Multi-arc system
11. Master Output: To subsequent trail arc in a Multi-arc system.
12. Parallel Input: From Master or previous Slave in a parallel machine set up.
13. Parallel Output: To Slave in a parallel machine set up
POWER WAVE ® AC/DC 1000 ® SD