Lincoln Electric IM10063 TCV400 - Manual

TCV400
OPERATOR’S MANUAL
For use with machines Codes: 11727, 11838
IM10063-A
February, 2012
Safety Depends on You
This power source is built to
TAFA design specifications by
Lincoln Electric. This welder is
designed and built with safety in
mind. However, your overall
safety can be increased by prop-
er installation ... and thoughtful
operation on your part. DO NOT
INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
Be sure this information reaches the operator.
You can get extra copies through your supplier.
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles of operation
and safe practices for arc welding equipment, we urge you to read our booklet, "Precautions and Safe Practices
for Arc Welding, Cutting, and Gouging," Form 52-529. Do NOT permit untrained persons to install, operate, or
maintain this equipment. Do NOT attempt to install or operate this equipment until you have read and fully
understand these instructions. If you do not fully understand these instructions, contact your supplier for
further information. Be sure to read the Safety Precautions before installing or operating this equipment.
IP21S
IEC 60974-1
RETURN TO MAIN MENU