Melnor 3050 - Manual (Page 11)

TO SELECT A USER-SET WATERING SCHEDULE
Note: User-Set Watering Schedules must be created by the user before they can be selected.
Press SETUP. Unit will beep two (2) times.
Press ᮣ until USER-SET flashes. Unit will beep two (2) times.
Press ACCEPT ▼. Unit will beep two (2) times.
Choose from the User-Set Watering Schedules displayed next to “USER-SET (schedules)” line to left of screen.
Press ᮤ or ᮣ to select desired User-Set Watering Schedule.
Press ACCEPT ▼ when desired User-Set Watering Schedule flashes. Unit will beep two (2) times.
TO MANUALLY OPEN OR CLOSE VALVE
Note: You must be out of SETUP mode to manually operate valve.
Press TIMER-ON/OFF to disable Daily Watering Schedule. Unit will beep two (2) times and go into Manual
mode.
Press VALVE-OPEN/CLOSE to operate valve. Unit will beep two (2) times and open valve.
When finished, press TIMER-ON/OFF to return to Daily Watering Schedule. Unit will beep two
(2) times.
TIMER
VALVE
TIMER
ACCEPT
ACCEPT
SETUP