Melnor 3050 User Manual
Page 4
TO SET CLOCK AND DATE
Setting the clock enables you to program customized watering schedules relative to the current time
of day.
NOTE: After installing batteries timer will go to timeset mode to set clock and date.
NOTE: To reset clock, press SETUP, unit will beep two (2) times.
Press
ᮣ
until TIMESET flashes.
Press ACCEPT ▼.
12-HOUR VS. 24-HOUR CLOCK
Unit defaults to AM/PM (12-hour) mode, number “12” will flash.
If 24-hour clock is desired, press ▲. Unit will beep one (1) time. Number “13” will be flashing when unit is in
24-hour mode.
NOTE: Press ▲ to correct mistakes after pressing the ACCEPT ▼ key. When ▲ is pressed, unit will beep one (1)
time and move back one step after each press.
TO SET HOUR
After selecting 12- or 24-hour clock (by pressing ▲):
Press
ᮤ
or
ᮣ
to select current hour. Unit will beep one (1) time for each press.
(Holding down keys will scroll numbers for faster selection.)
Press ACCEPT ▲ when current hour flashes.
ACCEPT
ACCEPT
SETUP