Lcd digital display with next step prompting – Melnor 3050 User Manual
Page 5
Advertising
TIMER MODE
SETUP
CYCLES
(per day)
START TIME
STOP TIME
MIST CYCLE
WATER DAYS
SKIP DAYS
ODD-EVEN
PRE-SET
(schedules)
USER SET
(schedules)
TIMER
on / off
VALVE
ACCEPT
SETUP
REVIEW
LIGHT
open / close
MODEL 3050
LCD digital
display
with next step
prompting.
TO SET MINUTES
After selecting Hour with ACCEPT ▼ key, minutes will flash.
Press
ᮤ
or
ᮣ
to select current minutes. Unit will beep one (1) time for each press.
(Holding down keys will scroll numbers for faster selection.)
Press ACCEPT ▼ when current minutes flash. Unit will beep one (1) time and go to Date setting.
NOTE: If in 12-hour mode, press ACCEPT ▼ after selecting proper AM/PM setting using
ᮤ
or
ᮣ
. This step is
skipped in 24-hour mode. Unit will go to Date setting.
ACCEPT
ACCEPT
Advertising