Melnor 3050 User Manual
Page 9
5) TO SET METHOD OF CONTROL
You can select one of the following methods, per schedule, to control how the Model 3050 will water on a daily
basis. (If NOTHING is selected, the watering will be for TODAY ONLY.)
WATER DAYS
Press
ᮤ
or
ᮣ
to select days of the week timer will perform watering cycles.
Press ACCEPT ▼ to choose flashing days of the week you wish to water. (Keep selecting if more than one
day of the week is desired.)
Press ACCEPT ▼ when no days of the week are flashing to go to Skip Days.
SKIP DAYS
Press
ᮤ
or
ᮣ
to select number of days timer will skip watering.
“NO”–timer will water every day.
1-6 –skips this many days between watering.
Press ACCEPT ▼ when no numbers are flashing to go to ODD-EVEN.
ODD-EVEN
Press
ᮤ
or
ᮣ
to select either “ODD” or “EVEN”.
Press ACCEPT ▼ to water on odd-numbered or even-numbered days of the month.
Press
ᮤ
or
ᮣ
to select a User-Set number, and Press ACCEPT ▼ to store schedule in flashing number.
The timer will automatically select the next available number (if any) up to 5. After 5, you must erase
an existing schedule by selecting a User-Set number, and press ACCEPT ▼. This will erase the existing
schedule for that number.
ACCEPT
ACCEPT
ACCEPT
ACCEPT
ACCEPT