Rapid-Air MINI-SERVO FEED: MS2, MS4 & MS8. 115vac, 1ph, 60hz - Manual (Page 7)


oPerATor inPUT seCTion
(ConTinUed)
Operator.Input.Section.
The following screen is displayed
when the period is pressed while the
“Main Selection menu” is displayed.
. RESET.JOB.PARAMETERS
. . TO.DEFAULT.VALUE
. . F1=RESET.VALUES
. . F4=RETURN.–.DON’T.RESET
It is very important that the operator
make a hard copy of the jobs on
a sheet of paper so there is a
permanent record.
The last function on the keypad is the
“RESET JOB PARAMETERS.” This
function should be used with special
caution as all the jobs being used will
reset to the default parameters and
cannot be restored without keying
each job number’s parameters.