Rapid-Air SERVO FEED GAG FEED: 950 SERIES - Manual (Page 4)

3
TABLE OF CONTENTS
CHARTS AND DRAWINGS DIRECTORY pg. 4
INTRODUCTION pg. 5
INSTALLATION AND MECHANICAL SETUP pg. 6
INSTALLATION OF MOUNTING BRACKET pg. 7
MECHANICAL ROLL RELEASE SETUP pg. 8
ELECTRICAL CABLES AND AIR LINE pg. 9
INTERFACING FEED WITH PRESS pg. 10
PRETEST WRITE UP pg. 11
LOADING MATERIAL pg. 12
SERVO INTERFACING EXPLANATION pg. 13-14
PROGRAMMING PROCEDURE pg. 15
DRIVE ROLL PARALLELISM ADJ. pg. 26
TROUBLESHOOTING pg. 27-28
OPERATIONAL MAINTENANCE PROCEDURES pg. 29-30
PRECAUTIONS AND SAFETY pg. 31
WARRANTY pg. 32