Progressive International Electronics C2000 - Manual (Page 18)

C2000 Operation
‚ 12
This will scroll all of the shift totals. After exhibiting all of the
totals, the display will return to the select function entry screen. If
another select function is desired, it may be entered, or the select
function mode may be exited by pressing the <CLEAR> key.
A similar sequence is used to print the current shift totals. By
pressing the <PRINT> key at the Select Function prompt, a shift
totals report will be printed if a printer is attached to the C2000.
As a precautionary measure, the Shift Change function may only
be implemented if shift totals have been completely viewed or
printed and if at lease one hour has elapsed since the last shift
change. To execute a shift change, simply press the <CHANGE>
key at the Select Function prompt. When this has been
accomplished, the C2000 changes the current shift total to zero.
The last shift total is then stored as shift 1. At any time, there are
four stored shift reports. They are the current shift, shift 1, shift 2,
and shift 3, with shift 3 being the oldest. Please note that all shift
reports are time/date stamped and contain a unique two-digit
number that increments by one each time a shift change takes
place.
The C2000 has a built-in clock/calendar to provide accurate
time/date stamping on reports and sales receipts. This
clock/calendar may be read by pressing <SELECT> to access