Progressive International Electronics C2000 - Manual (Page 22)

C2000 Program & Report
‚ 16
Operator Access
Access to report functions is accomplished through the entry of
a valid Operator PIN Code. First, press the <MANAGER>
key. You will be prompted by the display to enter your PIN
Code. Enter your Operator PIN Code on the numeric keypad.
(This number, with a maximum of four digits, is stored in the
C2000. Its purpose is to limit access to C2000 report data. The
number 1111 is the factory default value for the Operator PIN
Code.) Next, press the <ENTER> key. M:0 will appear in the
display, prompting you to enter the desired function mode
number on the numeric keypad. Press <ENTER> again to
generate the requested program & report function sequence. At
this point, if you wish to return to the operator mode, press the
<MANAGER> key.