AMX Wireless Touch Panels (Wave Server) - Manual (Page 20)

10 Installation ViewPoint Wireless Touch Panels l
ViewPort Docking Station
The ViewPort Docking Station (Figure 6) provides a built-in battery charger and an
angled desk docking station to cradle your ViewPoint touch panel. When a
ViewPoint is placed in the docking station's cradle, the ViewPoint makes contact with
the charging pins and the docking station then supplies power.
When a touch panel is not cradled on the docking station, a battery can be charged
when placed within the charging compartment. When a touch panel is cradled on the
docking station, all power is fed to the touch panel. A battery that was charging will
no longer be supplied with power until the ViewPoint is removed from the docking
station's cradle.
Figure 6
ViewPort Docking Station
Charging pins
Docking Station
Charging
compartment
Green LED
Red LED
Yellow LED