AMX Wireless Touch Panels (Wave Server) - Manual (Page 60)

50 Designing Touch Panel Pages ViewPoint Wireless Touch Panels
Setting the bargraph properties
Use the Button Properties page for Vertical Bargraphs shown in Figure 65 to set
channel, level, and button colors.
Setting the channel code
The channel buttons that set the device and button channel codes for the touch panels
are shown in Figure 66.
1. Press DEV to open the keypad and set the device number.
2. Enter 1, 2, 3, or 4 in the keypad. The AXCESS software program uses device
codes 1 through 4 to identify the touch panel. Refer to the Touch Panel Program
Reference section for detailed information.
3. Press ENTER to store the device number into memory, close the keypad, and
return to the Button Properties page.
Figure 65
Button Properties page for
Vertical Bargraphs
Note
Bargraphs will function on
VPW-CP/VPW-GS only.
Figure 66
Bargraph CHANNEL code
buttons
Note
The panel will not allow you to
enter a device number greater
than the DEVICE USED
without first displaying a
decision box. This box asks
you to decide whether you
accept the new selection or
default to the previous value