AMX Wireless Touch Panels (Wave Server) - Manual (Page 31)

ViewPoint Wireless Touch Panels Designing Touch Panel Pages 21
3. Enter 1988 in the keypad and press ENTER to open Protected Setup page
(Figure 21). For information on changing the password, refer to Touch Panel
Program Reference section. If you enter a wrong number, press CLEAR and re-
enter the number.
4. Press EDITOR to enable the Edit mode. The EDITOR button is highlighted when
enabled (Figure 21).
5. Press EXIT to close the Protected Setup page and return to the Setup page in Edit
mode.
6. Press EXIT again to return to the Main page. The EDIT button appears at the top
of the Main page indicating that Edit mode is active (Figure 22).
Note
If you press ENTER after
typing in an incorrect
password, you are
immediately returned to the
current page.
Figure 21
Protected Setup page with the
active EDITOR button