Alliance Laundry Systems UF18PNV - Manual (Page 7)

Safety
6 F232072
To provide personal safety and keep the machine in
proper working order, follow all maintenance and
safety procedures presented in this manual. If
questions regarding safety arise, contact the factory
immediately.
Use factory-authorized spare parts to avoid safety
hazards.
Operator Safety
To ensure the safety of machine operators, the
following maintenance checks must be performed
daily:
1. Prior to operating the machine, verify that all
warning signs are present and legible. Missing
or illegible signs must be replaced immediately.
Make certain that spares are available.
2. Check door interlock before starting operation
of the machine:
a. Attempt to start the machine with the door
open. The machine should not start with the
door open.
b. Close the door without locking it and
attempt to start the machine. The machine
should not start with the door unlocked.
c. Close and lock the door and start a cycle.
Attempt to open the door while the cycle is
in progress. The door should not open.
If the door lock and interlock are not
functioning properly, call a service technician.
3. Do not attempt to operate the machine if any of
the following conditions are present:
a. The door does not remain securely locked
during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly
grounded circuit.
Do not bypass any safety devices in the machine.
NEVER insert hands or objects into basket
until it has completely stopped. Doing so could
result in serious injury.
WARNING
SW012
Never operate the machine with a bypassed or
disconnected out-of-balance switch. Operating
the machine with severe out-of-balance loads
could result in personal injury and serious
equipment damage.
WARNING
SW010