Watlow Series 988LF - Manual (Page 2)

Introduction to the Watlow Series 988LF
Controllers
ii Using this Manual
ii Document Every Step
iii Notes, Cautions and Warnings
iii Technical Assistance
iii We Value Your Feedback
Chapter 1
Hardware Setup
1.1
Dip Switch Locations and Functions
Chapter 2
Installation and Wiring
2.1
Panel Cutout and Dimensions
2.2 Installing the Series 988LF
2.3 Wiring the Series 988LF
2.3 Input-to-output Isolation
2.3 Power Wiring
2.3 Sensor Installation Guidelines
2.4 Wiring 0-20mA and 4-20mA
Process Inputs
2.5 Wiring Example
2.7 Input 1 Wiring
2.8 Remote Set Point Option Wiring
2.9 Output 1 Wiring
2.10 Output 2 Wiring
Chapter 3
Front Panel and Display Loop
3.1
Keys and Displays
3.2 Display Loop
Chapter 4
The Setup Menus
4.1
Navigating the Setup Menus
4.2 Setup Prompts
Chapter 5
The Operation Menus
5.1
Navigating the Operation Menus
5.2 Display Prompts
Chapter 6
The Factory Menus
6.1
Reaching the Diagnostics Menu
6.5 Reaching the Calibration Menu
Chapter 7
Tuning, Manual Operation,
Alarms and Error Codes
7.1
Auto-tuning (Heat and/or Cool)
7.2 Manual Tuning
7.3 Manual and Automatic Operation
7.4 Using Alarms
7.5 Error Code E1 and E2 Messages
7.6 Error Code Actions
Appendix
A.1
Warranty and Returns
A.2 Glossary
A.4 Index
A.6 Specifications
A.7 Model Number
A.8 Menu Overview
A.9 Declaration of Conformity
Table of Contents
Table of Contents WATLOW Series 988LF User’s Manual