Watlow Series 988LF - Manual (Page 22)

3.2 WATLOW Series 988LF User’s Manual Front Panel and Display Loop, Chapter 3
Display Loop
Display Loop
The Display Loop is the “home” state of the Series 988LF controller. Pressing the
Display key
∂ returns the controller to the Display Loop from any prompt in any
menu. The controller automatically returns to the Display Loop from any menu
when a minute passes without any keys being pressed.
Figure 3.2 -
The Display Loop
units selected (units,
°
F or
°
C)
set point 1 (change with Up-arrow > or Down-arrow < key)
deviation from set point, process 1 minus set point 1 (DEV light on)
percent output (%OUT light on)
current input 1 reading
current input 1 reading
current input 1 reading
current input 1 reading
[`988]
[`988]
[`988]
[`988]
[`988]
[`100]
[`988]
[``°C]
DISPLAY
DISPLAY
DISPLAY
DISPLAY
NOTE:
For information on
input 1
[`In1]
ranges, refer to
Chapter 4.