Yokogawa EJA310E - Manual (Page 66)

<9. General Specifications>
9-18
IM 01C25B01-01E
Table. 1 Wetted Parts Materials for EJ110, EJ120, EJ310, and EJ430
Wetted parts
material code
Cover flange and
process connector
Capsule Capsule gasket Drain/Vent plug
S # ASTM CF-8M
Hastelloy C-276 (Diaphragm)
F316L SST* 1 (Others)
Teflon-coated 316L SST
PTFE for EJX120A
316 SST
H ASTM CF-8M Hastelloy C-276 PTFE (Teflon) 316 SST
M ASTM CF-8M Monel PTFE (Teflon) 316 SST
T ASTM CF-8M Tantalum PTFE (Teflon) 316 SST
A Hastelloy C-276 equivalent Hastelloy C-276 PTFE (Teflon) Hastelloy C-276
D Hastelloy C-276 equivalent Tantalum PTFE (Teflon) Hastelloy C-276
B Monel equivalent Monel PTFE (Teflon) Monel
*1: 316L SST, F316 SST for EJX120A and EJX110A with measurement span code F.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of 316 SST
material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
Table. 2 Wetted Parts Materials for EJ130
Wetted parts
material code
Cover
flange
process connector Capsule Capsule gasket Drain/Vent plug
S # F316 SST ASTM CF-8M * 1
Hastelloy C-276* 2
(Diaphragm)
F316L SST, 316L SST (Others)
Teflon-coated
316L SST
316 SST
*1: Cast version of 316 SST. Equivalent to SCS14A.
*2: Hastelloy C-276 or ASTM N10276.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of
316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
Table. 3 Wetted Parts Materials for EJ440
Wetted parts
material code
Cover
flange
process connector Capsule Capsule gasket
Drain/
Vent plug
S # F316 SST ASTM CF-8M *
1 (C-capsule)
F316L SST (D-capsule)
Hastelloy C-276 * 2 (Diaphragm)
F316L SST (Others)
Teflon-coated
316L SST
316 SST
*1: Cast version of 316 SST. Equivalent to SCS14A.
*2: Hastelloy C-276 or ASTM N10276.
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of
316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.