Atlantis A02-PL303-WN - Manual (Page 61)

61
 Press the Sync Button of device B or C of the BC network group for 1~3
seconds to turn it into Broadcast State, you should find the Power LED
blinks steadily signifying it is in Broadcast state.
 Press the Sync Button of device A for 1~3 seconds to turn it into Join
State, you should find the Power LED blinks steadily signifying it is in
Join state.
 Wait for the devices to boot again and when the PLC LEDs of both
devices lit steadily, you will now have device A joined with the BC
network group.
Scenario 3: A NetPower device A of network group AD wants to join an
existing network group BC. For a device which already belongs to a network
group is to join with a different network group, that device has to be ungrouped
from its current attached group first.
Example:
 Press the Sync Button of device A for more than 10 seconds to ungroup
it from network group AD.
 Then press the Sync Button of device (B or C) of network group BC for
1~3 seconds to turn it to Broadcast State, you should find the Power
LED blinks steadily signifying it is in Broadcast state.
 Press the Sync Button of device A again for 1~3 seconds to turn it to
Join State, you should find the Power LED blinks steadily signifying it is
in Join state.
 Wait for the Sync LED of both devices A and (B or C) lit steadily. Now
you will have device A join the network group BC.