Atlantis A02-PL303-WN - Manual (Page 8)

8
human health objectives connected to a responsible treatment and recycling
activities are achieved.
PS.: The above mentioned information are reported herewith in compliance with Directive
2002/96/CE, which requires a separate collection system and specific treatment and disposal
procedures for the waste of electric and electronic equipments (WEEE). For further and more
detailed information, we invite you to visit our website at www.atlantis-land.com.
Atlantis suggest to vistit the web site www.atlantis-
land.com in order to retrieve update manual, techsheet and
driver.
Before starting, take a few minutes to read this manual.
Read all of instructions and save this manual for later
reference.
Cautions

Do not place the device under high humidity and high temperature.
 Do not use the same power source for this device with other equipment.
 Do not open or repair the case yourself. If the device is too hot, turn off the
power immediately and have a qualified serviceman repair it.
 Do NOT upgrade firmware on any Atlantis product over a wireless connection.
Failure of the device may result. Use only hard-wired network connections.
Important Safety Instructions
Please read these instructions carefully:
 Unplug the PowerLine HD Ethernet Adapter from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
 Do not use the PowerLine HD Ethernet Adapter near water.
 The PowerLine HD Ethernet Adapter should never be placed near or over a
radiator or heat register, or in a built-in installation unless proper ventilation
provided.
 The PowerLine HD Ethernet Adapter should be operated from the type of
power indicated on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
 The PowerLine HD Ethernet Adapter relies on the building’s electrical
installation for short-circuit (over current) protection. Ensure that a fuse or
circuit breaker no larger than 220 VAC is used on the phase conductors (all
current-carrying conductors).