Connection, 1 plugging the cable into the bt200, Connection -1 – Yokogawa BT200 User Manual

Page 14: 1 plugging the cable into the bt200 -1

Advertising
background image

<Toc> <Ind>

<3. CONNECTION >

3-1

IM 01C00A11-01E

3. CONNECTION

3.1 PLUGGING THE CABLE

INTO THE BT200

When plugging the dedicated communication cable
into the BT200, adjust the up arrow mark on the
cable to the

●

mark on the BT200 connector and

push the cable into position until a click sounds.

Note: You cannot plug the connector cable for the BT100 into

the BT200, because the BT200 and BT100 have different
connector structures.

Advertising
See also other documents in the category Yokogawa Sensors: