Yokogawa BT200 User Manual
Page 39
<Toc> <Ind>
<5. USING THE BT200 FUNCTIONS >
5-9
IM 01C00A11-01E
(1) ID (Identification Code) SETUP
Each BT200 BRAIN TERMINAL is assigned an ID
(identification code) to identify itself from other
terminals. The ID is displayed on the startup panel
and the security code setup panel. You can change
the ID from the utility panel. The ID is up to eight
characters long.
ID
ID:BT200
set new ID
_
CODE
CAPS
CLR
ESC
F0511.EPS
1. Select ‘1.ID’ from the utility
panel to call panel .
Type the new ID and press
[ENT] twice.
1
᭺
1
᭺
(2) LANGUAGE SELECTION (BETWEEN
ENGLISH AND JAPANESE)
a) English to Japanese
LANGUAGE
1.ENGLISH
2.JAPANESE
ESC
F0512.EPS
1. Select ‘3. LANGUAGE
SELECT’ from the utility panel
to select the panel .
If you Select ‘2. JAPANESE’
and press [ENT], the
message mode is switched to
Japanese.
[F3] NO
[F4] OK
➝
Return to panel .
➝
Go to panel .
1
᭺
2
᭺
3
᭺
LANGUAGE
1.ENGLISH
2.JAPANESE
change JAPANESE
NO
OK
1
᭺
[F4] ESC
➝
Start
communication,
returning to the
initial data panel.
1
᭺
3
᭺