Yokogawa In-Situ Gas Analyzer TDLS200 - Manual (Page 28)

28
IM11Y01B01-12E-A
1st Edition
3.2 Adjustment and Optimization of Alignment - <1200
o
C (2200
o
F)
Installations:
This section will aide in the alignment of the large aperture optics assembly in a high temperature
(i.e. with variable degree of background radiation >800
o C) application using an oscilloscope (or
scope-meter). Please read the entire procedure before starting work and ask your local Yokogawa
service group for further information if required. This procedure can also be performed by local
Yokogawa service personnel if required – please contact for further details.
Please note that this procedure is not intended to teach/train someone how to use an
oscilloscope!
If you do not know how to use an oscilloscope, please align the analyzer by using the
method mentioned in the user manual
.