Yokogawa Touch Screen GP20 - Manual (Page 25)

2-7
IM 04L61B01-02EN
Creating Setup Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
3
Edit the channel settings.
Edit the setup items in the content area.
The DI channel setup window
is loaded, and the items
in the content area change.
Channel number
1 line = 1 channel
Scroll right to view
more setup items.
Note
• The changes you make in the content area are retained in the software.
• The software is designed to operate offline, so all items in the content area can be changed.
2.3.2 Editing and Manipulating Values
Input Controls and Dialog Boxes
When you edit settings on this software, input controls and dialog boxes shown in the table
below appear for you to select or enter values.
Control Type Display Example Setup Procedure
Text box Enter text or numbers.
Check box When the check box is selected, the setting is “On”
or enabled.
List box Click the arrow, and select from the list that appears.
Option buttons Click to select.
Dialog Box Type Display Example Setup Procedure
Channel selection button Operation 1
Step 1
To configure a specific channel such as an I/O
channel, click a channel number to specify the
channel you want.
Color selection Operation 1
Step 2
Click a color on the color selection palette in the
dialog box. You can also enter the RGB values to
specify any color.
Add channel Operation 2 When specifying multiple channels such as
when editing a display group, click a channel
number button to add the channel to the channel
configuration. The added channel is displayed as a
character string.
Data selection Operation 3 When specifying the internal switch or other item,
click the displayed character string such as the
switch number. (Same as channel selection.)
Special dialog box (calibration
correction)
Operation 4 A dialog box for editing calibration correction values.
Enter the correction value directly.
Examples of representative editing operations that show the above dialog boxes is provided
on the next page.
From the content selection tree, select the setup item that you want to edit, and edit the
setup items that appear. In general, you can click a channel or data string to edit settings.
2.3 Editing Setup Data