Yokogawa Touch Screen GP20 - Manual (Page 26)

2-8
IM 04L61B01-02EN
Operation 1
1
Set the channel range.
Click here (▼) to show
the available values.
Click to display the
Channel selection
dialog box (see below).
Enter values within
the selectable range.
This example shows how to set the reference channel for a difference calculation. Click the
channel number under Reference channel.
The Channel selection dialog box appears.
Select from the channels that are
displayed as a result of module detection.
Show or hide by channel type
(when multiple channel types
are available).
Clicking a number applies
the output destination
and closes the dialog box.
To not change or not set,
click Cancel to return.
2
Scroll to the right, and set all necessary items.
Enter a character string.
Select this check box to enable.
Click to open the Color selection dialog box (step 3).
3
If you want to change the alarm mark color, click a color.
The color selection dialog box appears.
Select a
color.
To create a user-defined
color, enter numbers.
2.3 Editing Setup Data