Yokogawa Touch Screen GP20 - Manual (Page 3)

i
IM 04L61B01-02EN
Introduction
This manual explains how to use SMARTDAC+ STANDARD Hardware Configurator. To
ensure correct use, please read this manual thoroughly before beginning operation.
Notes
• The contents of this manual are subject to change without prior notice as a result of
continuing improvements to the software’s performance and functions.
• Every effort has been made in the preparation of this manual to ensure the accuracy of its
contents. However, should you have any questions or find any errors, please contact your
nearest YOKOGAWA dealer.
• Copying or reproducing all or any part of the contents of this manual without
YOKOGAWA’s permission is strictly prohibited.
• The TCP/IP software of this product and the document concerning the TCP/IP software
have been developed/created by YOKOGAWA based on the BSD Networking Software,
Release 1 that has been licensed from University of California.
Trademarks
• vigilantplant is a registered trademark of Yokogawa Electric Corporation.
• SMARTDAC+ is a trademark of Yokogawa Electric Corporation.
• Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems
Incorporated.
• Pentium is a trademark of Intel Corporation in the United States and/or other countries.
• Company and product names that appear in this manual are registered trademarks or
trademarks of their respective holders.
• The company and product names used in this manual are not accompanied by the
registered trademark or trademark symbols (® and ™).
Revisions
December 2012 1st Edition
February 2013 2nd Edition
May 2013 3rd Edition
3rd Edition: May 2013 (YK)
All Right Reserved, Copyright © 2012-2013, Yokogawa Electric Corporation