Yokogawa Touch Screen GP20 - Manual (Page 44)

2-26
IM 04L61B01-02EN
4
On the Submenu, click Send Settings.
5
A dialog box for entering communication information appears. From the user settings
sent in step 3, enter the User Name and Password for the Admin user level.
User Name and Password
for the Admin user level
6
Click OK to send the settings.
The setup data will be sent.
Changing User Information in the GX/GP via Communication
Follow the procedure below to change the user information of a logged-in user from this
software.
How to change the user information of other users (excluding your own): 2.5.2 Sending Setup
Data , or 2.5.3 Sending User Settings
1
From the contents selection tree, select Security settings - User settings, and then
change the user registration information, such as the user name and password.
2
From the content selection tree, select Security settings - Security basic settings,
and set Communication under Security function to Off.
2.5 Receiving and Sending Setup Data