Yokogawa Standalone MW100 User Manual
Page 24
In the ―This Controller‖ area, enter the starting data table address
for the data to be sent (I:1.0), the Size in Elements
(number of data words) (4), and the Channel (1 for Ethernet). In the ―Target Device‖ area, enter the starting data table
address of the DX Advanced (N30:0 for Communication Channel C01). In the ―MultiHop‖ selection box, select ―Yes‖. Then
click on the ―MultiHop tab at the top of the Setup Screen.
In the ―To Address‖ area, enter the IP address of the DX Advanced (192.168.1.100). Then click on the close window (X) at
the top right of the Setup Screen (the screen can also be closed by clicking on the ―Setup Screen‖ In the MSG instruction.
The MSG Write to the DX Advanced is now complete.
21