Yokogawa Standalone MW100 - Manual (Page 55)

Next Rungs will be added to monitor the MW100’s current Status. With the Status words (B3:0 thru B3:4) reflecting either
a ―0‖ or ―1‖. Since only Bit 0 of each
word is used, we can utilize Bit instructions for Status monitoring. In this example, the
MW100 Status Bit information is moved from Binary File #3 addresses into PLC Output addresses.
With the MicroLogix Project downloaded to the CPU and the CPU placed into ―Run‖ mode, here is a screen snapshot
showing the Status of the MW100 (Measurement Started, Math Channels Started, and Recording Started)…..
52