Yokogawa Standalone MW100 - Manual (Page 53)

Next, the MicroLogix 100 will be setup to read the Status information from the MW100 via a Message Instruction. It is
assumed that the MicroLogix’ Channel 1 has already been setup as IP address 192.168.1.96.
A rung is entered containing a ―MSG‖ instruction assigned to address MG10:0 and an XIC (normally closed contact
assigned to MG10:0.EN (MSG Instruction MG10:0, ―Enabled‖ bit
) which will toggle the instruction as follows:
Select ―Top‖ to return to main
menu……
Once the instructions are entered
into the rung, double click on the
―Setup Screen‖ portion of the MSG
instruction……
50