Stuart Turner CH 4-30 FL - Manual (Page 2)

- 2 -
Cont ...
PRODUCT DESCRIPTION
Electric motor driven centrifugal pump complete with an automatic control system,
consisting of flow switch, and electronic control.
APPLICATION
The Stuart CH FL range is designed for pressure boosting applications in vented stored,
hot, cold or blended clean water systems, where under gravity, a flow is available of at
least 1 l/min. If you wish to boost both hot and cold services, then CH Boostamatic models
must be used, for further details contact ‘PumpAssist’.
Inlet pressures to the pump and ambient temperatures must not exceed the values
given in the technical specifications.

This pump set must not be used for any other
application without the written consent of Stuart
Turner Limited and in particular must not be
connected directly to the mains water supply.

This pump must not be connected directly to the
mains water supply.

This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without
supervision.

Children should be supervised to ensure that they do
not play with the appliance.

This product should not be used for the supply of
water to more than one dwelling (house, apartment,
flat).
Please read installation details carefully as they are intended to ensure this product
provides long, trouble free service. Failure to install the unit in accordance with the
installation instructions will lead to invalidation of the warranty.
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a dry,
frost and vibration free location in its original packaging.